In my previous post, I warned that I was experiencing some measure inconsistency.
The reason is simple: my audio system sucks 🙁
For some measures, I recorded the LCD audio output, and for some others, I recorded the audio output of my digital audio system.
But my digital audio system is adding an audio latency that varies from about 40ms for PCM 2.0 to about 90ms for Dolby Digital! (the PS3 could introduce some of this latency, see EDIT2)
Speaking of stuffs that may add latency, a good advice I could give is not to use weak usb extension cable.
I changed the following stuffs so as to take better measures:
- only record the LCD audio output
- use a better microphone that makes a lot less noise
- increase the LCD audio output level
- take all measures within 10cm near the speaker (1m = 3.4ms)
- only start the sixaxis emulator, and record the sound with another PC
New measures of the response time:
- Wireless sixaxis: average 112ms, standard deviation 11ms
- Wired sixaxis: average 108ms, standard deviation 10ms
- Sixaxis emulator: average 123ms, standard deviation 8ms
Note that this response time probably includes the response time of the LCD audio output, which seems to be quite constant, since the standard deviation is about 10ms in each case.
The sixaxis emulator is adding 11ms latency compared to the wireless sixaxis, and 15ms compared to the wired sixaxis.
This actually shows the sixaxis emulator is doing quite a good job 🙂
EDIT: I took new measures for CSS in Win7 too, it gives a 158ms response time, with a 16ms standard deviation.
EDIT2: I should measure the response time for CSS with my digital audio system, so as to see if the PS3 is a source of audio latency for dolby digital…
I am interested in integrating Bluetooth dongle as a method to control PS3 with homeautomation software like Homeseer, CQC, Girder etc. I don't want to buy additional set-top IR/BT converters ($, not flexible, take up space).
As a first step, PC is going to receive IR from universal remote via IRA v3 or similar and then send appropriate commands via BT dongle to PS3. The commands should go beyond PS3 controller and include things like 'subtitles.'
(e.g. http://www.mythtv.org/wiki/Sony_PS3_BD_Remote)
Suggestions? I don't want keyboard/mouse to control PS3, I just want to be able to send discrete command codes to PS3. Which libraries do I need for that?
What OS are you using?
If your OS is windows, you will have to find a way to access to the bt l2cap layer.
In any case, using linux to get the hcidump of the PC-sixaxis connection (pairing procedure + all key presses) seems to be a good idea.
If this hcidump is not enough, another idea is to get the hcidump of the ps3-sixaxis connection thanks to the sixproxy for ex.